Deluxe Electric Hose with direct connect swivel end at the vacuum cleaner. A fingertip switch enables you to stop the powerbrush motor for cleaning bare floors. For use on Miele S514i Solaris series canisters to mate with the SEB 234 or SEB 213-2 powerbrush. These powerbrushes have cords which clip on the wand and are manually plugged into this hose. This hose has not been available since the Summer of 2020 and there is no reasonable substitute available. Please see this Schematic of Repair Parts or contact us for ordering parts for the hose handle. This hose is designed to be used with Miele S514i Solaris series canisters when using an SEB 224, SEB 213 or SEB 213-2 Powerbrush.
Electric Hose with a short cord at the machine end to plug into the vacuum cleaner. This hose is for use on Miele S312i, S314i, S401i and S434i canisters to mate with the SEB 234 or SEB 213 powerbrush. These powerbrushes have cords which clip on the wand and are manually plugged into this hose. This hose has not been available since the Spring of 2016 and there is no reasonable substitute available. Please see this Schematic of Repair Parts or contact us for ordering parts. This hose is designed to be used with Miele S312i, S314i and S401i canisters when using an SEB 224, SEB 213 or SEB 213-2 Powerbrush.
Electric Hose with a short cord at the machine end to plug into the vacuum cleaner. This 1 1/4" (32mm) ID hose is for use on Miele S200i series compact canisters to mate with the SEB 234 or SEB 213 powerbrush. These powerbrushes have cords which clip on the wand and are manually plugged into this hose. It can not be used on Miele S200i series vacuums that have a speed control on the hose. This hose has not been available since the Spring of 2016 and there is no reasonable substitute available. Please see this Schematic of Repair Parts or contact us for ordering parts. This hose is designed to be used with Miele S200i series canisters when using an SEB 224, SEB 213 or SEB 213-2 Powerbrush.
This genuine Miele Belt is for the SEB 213, SEB 213-2, SEB 217, SEB 217-2 and SEB 217-3 Powerbrushes plus STB 205 STB 205-2, and STB 205-3 Turbobrushes. The cog design provides positive power transfer from the motor or turbine to the brush roll. It can not stretch and slip. This reinforced cog type belt is packaged and sold individually. They typically will last three to five or more years.