This Deluxe Floor Brush is 12" wide and 2.5" deep, having natural hair brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides between the brush strips carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle. This very deluxe floor brush will fit your Hoover WindTunnel wands perfectly even though it is not made by Hoover.
This genuine Hoover floor brush is 9" wide and 2" deep, having a nylon brush strip through the center of the nozzle and at the ends. Combine this floor brush with the extra long hose shown below to easily and effectively clean bare floors with this upright.
Extend the reach of your Hoover WindTunnel upright with this extra long wire-reinforced stretch hose. Its great for stairs and reaching into areas where you vacuum can't go. By purchasing this hose with the Hoover WindTunnel shown above, you can extend your total attachment reach to 20'. (Hose stretched to about 15' plus two wands and the crevice tool)
Extend the reach of your Hoover attachments for those extra high ceilings, etc. This 16.5" long genuine Hoover wand is constructed of high impact ABS Plastics, making it very light weight and durable. While the Hoover upright shown above is packaged with two wands, you can purchase additional ones for an even longer reach.
This 8-Pc. Mini Attachment Set is great for reaching into very small areas of electronic equipment, car interiors, computers, etc. The small 30" long 1/2" hose is equipped with an adapter which attaches to your existing hose. Two 3/8" mini wands mate with a very small crevice tool and two sizes of dusting brushes. This attachment set will fit on your Hoover WindTunnel wands perfectly even though it is not made by Hoover.
Genuine Hoover "Type Y" Allergen Filtration Paper Bags to keep your Hoover vacuum cleaner performing well. Contains three high filtration paper bags. Include additional paper bags when ordering the Hoover upright shown above and receive free shipping in the contiguous USA as well.
This pack of 2 primary filters is designed to fit in the Hoover WindTunnel bag chamber below the paper bag. The filter measures 5" x 2 3/16" x 3/8" with a rectangle notched out of the one corner. While initially green as shown, it is now white in color.
This genuine Hoover WindTunnel Cartridge Exhaust Filter fits in a door on the side of the vacuum. It consists of fanfold filter media in a black plastic cartridge. (This frame was originally white.) The cartridge measures 10 15/16" x 3 3/8" x 1/2". This design provides a large filter media area for reduced resistance to air flow while producing a high level of filtration.
Genuine Hoover Belt to keep your Self-Propelled WindTunnel upright performing well. This flat stretch type belt should be changed at least once per year to keep its self-propelled and brush working well. This belt is designed for all Hoover Self Propelled WindTunnel uprights. These have two belts, the other being the WindTunnel Self Propelled 'V' Belt.
Genuine Hoover Belt to keep your Self-Propelled WindTunnel upright performing well. This 'V' belt is reinforced and will not stretch so it will last for many years. It is tensioned by a spring loaded idler pulley when the brush roll is turned on. This 'V' belt is designed for all Hoover Self Propelled WindTunnel uprights. These have two belts, the other being the WindTunnel Self Propelled Flat Belt.