Bagless Cone Filter - Style DCF-2 - 61805
WhirlWind Filters - 2 Cassette plus 2 Secondary
Two Victory Micron Exhaust Filters - Pkg. #60665
Victory & WhirlWind Filter #39334
Micron Rear Exhaust Filters - Pk. of 2 - #60801
Micron Exhaust Filter & Holder #54777
WindTunnel Primary Filter #38765023
Bagless Upright HEPA Filter Cartridge #43611042
Hoover HEPA Exhaust Filter #43613024
WindTunnel HEPA Filter - Black Frame #43613022
This Fan-fold Cone Filter Style DCF-2 is used in the Eureka Bagless Cyclonic uprights to provide a large area filter media for improved air flow.
View Larger Image
Archived Retired Product - Not Available for Sale
Package of 2 Micron Filters #60696 that fit on the back of the cyclonic chamber plus 2 thick Micron Filters #39334 that fit below the cyclonic chamber on many earlier WhirlWind uprights. One of each is used at a time. They will not fit the Eureka WhirlWind model 6140. These filters should be changed every three months and brushed off more frequently. Each cyclonic chamber filter measures 5.5" x 4" x 0.25" and the filter below the chamber measures 4.75" x 4.125" x 0.4".
Archived Retired Product - Not Available for Sale
This package contains two thick micron exhaust filters which slide inside the small grey door along the side near the bottom of the vertical Victory upright body where the air is exhausted. Only one filter is used at a time.
Archived Retired Product - Not Available for Sale
This Eureka micron filter fits at the bottom of the bag housing on Victory uprights and below the cyclonic chamber on most earlier WhirlWind uprights.
Archived Retired Product - Not Available for Sale
Pack of 2 thick micron exhaust filters which fit inside the grey filter holder on the rear of some Eureka uprights where the air comes out.
Archived Retired Product - Not Available for Sale
Micron filter and holder for use on many Eureka Victory, WhirlWind and Self Propelled uprights when more costly HEPA filtration is not needed.
View Larger Image
Archived Retired Product - Not Available for Sale
This deluxe three layer WindTunnel Primary Filter fits in the bag chamber below the paper bag. It consists of a white screen, a yellow filter layer and a green filter layer. The filter measures 5" x 2 3/16" x 3/8" with a rectangle notched out of the one corner.
Archived Retired Product - Not Available for Sale
This genuine Hoover HEPA Cartridge Filter fits inside the Twin Chamber® Dirt Container on all Hoover Bagless uprights. It consists of a cylinder shaped cartridge with fanfold filter media between the black vinyl ends. This long life filter has a coating similar to teflon which makes it very easy to clean. It can even be washed by holding it under running water. Hoover recommends replacing this filter every three to six months. This filter has been replaced by package #40140201 which contains one "Type 201" filter #42611049.
This fanfold design provides a large filter media area for reduced resistance to air flow while producing a very high level of filtration which meets the stringent HEPA specification. View Larger Image
This fanfold design provides a large filter media area for reduced resistance to air flow while producing a very high level of filtration which meets the stringent HEPA specification. View Larger Image
Archived Retired Product - Not Available for Sale
This genuine Hoover HEPA Exhaust Filter Cartridge fits all Hoover Savvy, Dual V and V2 Technology uprights. It is typically used when these vacuums are configured for use with paper bags. The Hoover Foam Exhaust Filter #38766028 is typically used in the bagless configuration.
The fanfold design provides a large filter media area for reduced resistance to air flow while producing a very high level of filtration which meets the stringent HEPA for the air which passes through it.
The fanfold design provides a large filter media area for reduced resistance to air flow while producing a very high level of filtration which meets the stringent HEPA for the air which passes through it.
Archived Retired Product - Not Available for Sale
This genuine Hoover WindTunnel HEPA Cartridge Exhaust Filter fits in a door on the side of the vacuum. It consists of fanfold filter media in a black plastic cartridge. The cartridge measures 10 15/16" x 3 3/8" x 1/2". This design provides a large filter media area for reduced resistance to air flow while producing a high level of filtration which meets the stringent HEPA specification for the air that passes through it.
Archived Retired Product - Not Available for Sale