Vacuum Accessories

This Deluxe Floor Brush for use on Panasonic uprights is 10" wide and 1 1/2" deep, having natural hair bristles around its parimeter. While this floor brush is not made by Panasonic, it is manufactured to fit and work perfectly in their upright wands. A floor brush on your upright hose and wands will clean much better than using the main upright nozzle on your bare floors.   View Larger Image

This floor brush to fit Hoover canisters is 9" wide and 2" deep, having a nylon brush strip through the center of the nozzle and at the ends. This is the standard floor brush packaged with most Hoover canister vacuums that use paper bags.

This generic 35mm Floor Brush will fit the Hoover Duros and Maytag canisters in their S3590 series. It is 11.75" wide and 2.5" deep, having natural hair brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides between the brush strips carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle.

The wands and floor nozzles on the Hoover canisters this floor brush fits typically fit over the wand and have release buttons on them since they lock on. This nozzle simply friction fits over the wand without a locking device.

For the same nozzle to fit Hoover uprights and bagless canisters with the 1 1/4" USA size, see the Deluxe 12" Floor Brush (1 1/4"). If your attachments have pins and fit inside the wand, see the Hoover 9" Floor Brush with Pin.   View Larger Image

This 9" wide Titan floor brush is for use on Titan canister and power team vacuums. Since it is made by the same company as later Kenmore canister vacuums it will also fit and work well on them. It has a strip of natural hair bristles in the center from side to side except where the center intake is located. Short strips of bristles are on the front and back edges, being before and after the intake. This design minimizes the possibility of pushing debris ahead of the nozzle where it isn't picked up.
  View Larger Image