Miele SEB 213 Powerbrush with External Cord
Eureka 1373 "Express Series" Power Nozzle
Miele Turbo Comfort STB 205-3 Turbobrush
Miele Turbo Comfort STB 205-2 Turbobrush
SEBO Turbo Head Nozzle - Dark Grey
Hoover Hand Turbine Nozzle w/Pin - 49129008
Deluxe AirTeQ Rug/Bare Floor Nozzle #SBD 650-3
Deluxe Rug/Bare Floor Nozzle #SBD 550-3
Deluxe Rug/Bare Floor Nozzle #SBD 450-3
Miele AllTeQ Rug/Bare Floor Nozzle #SBD 285-3
The SEB 213 powerbrush is equipped with long, soft bristles for your more delicate carpets. It is designed to clean low to medium nap carpets. The cog type belt provides positive power transfer from its motor to the brush roll. A special two-way swivel in the wand connector makes this powerbrush very easy to steer and maneuver for greater ease of use.
The SEB 213 can be used as a direct replacement for the earlier SEB 191 powerbrush. When replacing your SEB 213 powerbrush, consider purchasing an SEB 236 or SEB 228 powerbrush from Ristenbatt Vacuum for more efficient and easier cleaning. View Larger Image
The SEB 213 can be used as a direct replacement for the earlier SEB 191 powerbrush. When replacing your SEB 213 powerbrush, consider purchasing an SEB 236 or SEB 228 powerbrush from Ristenbatt Vacuum for more efficient and easier cleaning. View Larger Image
Archived Retired Product - Not Available for Sale
This is the most deluxe Eureka power nozzle featuring a steel brush roll with replaceable brush strips, beater bars which also stiffen the bristles, large easy rolling wheels and a bright headlight. It is significantly better designed and constructed than the Eureka "World Vac Series" power nozzle. This power nozzle has been replaced by the Sweep n Groom model E1386K-1 power nozzle which is the same except for no headlight.
View Larger Image
Archived Retired Product - Not Available for Sale
This Miele Turbo Comfort STB 205-3 Turbobrush is equipped with long, soft bristles for your more delicate carpets. It is designed to clean low to medium nap carpets. The cog type belt provides positive power transfer from its turbine to the brush roll. This Turbobrush has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 series canister vacuums.
The Miele STB 205-3 was discontinued in February 2019 and replaced with the newer, more aggressive Miele STB 305-3 Turbobrush. View Larger Image
The Miele STB 205-3 was discontinued in February 2019 and replaced with the newer, more aggressive Miele STB 305-3 Turbobrush. View Larger Image
Archived Retired Product - Not Available for Sale
This Miele Turbo Comfort STB 205-2 Turbobrush is equipped with long, soft bristles for your more delicate carpets. It is designed to clean low to medium nap carpets. The cog type belt provides positive power transfer from its turbine to the brush roll. This Turbobrush has a two tabs on its elbow to mate with the parking slots on the Miele S200i, S300i, S400i, S500i and S600i series canister vacuums.
The Miele STB 205-2 was discontinued in February 2019 and replaced with the newer, more aggressive Miele STB 305-3 Turbobrush. View Larger Image
The Miele STB 205-2 was discontinued in February 2019 and replaced with the newer, more aggressive Miele STB 305-3 Turbobrush. View Larger Image
Archived Retired Product - Not Available for Sale
This SEBO 6780ER Turbo Head Nozzle is equipped with long, soft bristles for your more delicate carpets. It is designed to clean low to medium nap carpets. The cog type belt provides positive power transfer from its turbine to the brush roll. This nozzle has been replaced by the more aggressive SEBO 8365GS Turbine Nozzle.
View Larger Image
Archived Retired Product - Not Available for Sale
The brushing action by the turbine driven revolving brush roll provides deeper cleaning of your upholstered furniture and carpeted stairs. Experience cleaning with the strong suction from your Hoover Canister vacuum combined with the brushing action of this turbine driven nozzle. It's much more effective than using a small hand held vacuum cleaner.
Archived Retired Product - Not Available for Sale
This unique AirTeQ combination nozzle has streamlined airflow for uninterrupted floor contact, superior cleaning results and minimum energy use. It performs well on all smooth flooring and low-pile carpeting. It has top mounted levers to easily switch between carpets and bare floors.
For bare floors brush strips around the perimeter pop out to provide a non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums. View Larger Image
For bare floors brush strips around the perimeter pop out to provide a non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums. View Larger Image
Archived Retired Product - Not Available for Sale
This is a combination tool with a top mounted foot pedal to switch between carpets and bare floors. For bare floors brush strips long the front and back pop out to provide a soft, non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strips are retracted, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.
View Larger Image
Archived Retired Product - Not Available for Sale
This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip along the front and squeege along the back pop out to provide soft, non-scratching cleaning action. Notches along the front of the brush allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip and squeege are retracted, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. A soft, non-scratching roller under the elbow bears any downward pressure, enabling the nozzle to glide gently over the floor.
View Larger Image
Archived Retired Product - Not Available for Sale
This Miele AllTeQ is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to provide non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.
View Larger Image
Archived Retired Product - Not Available for Sale