Parts & Components

This 100' roll of 20 Guage Low Voltage Wire is typically used to connect the wall inlets to the central vacuum main power unit to control its motor. This Class 2 wire passes all building code requirements for this type of use.

When installing Hayden SuperVac systems, connect the same colored wire to the same side of the inlet valves. If the LED on the SuperHose does not mirror the color of the one on the SuperVac, simply reverse the two wires at the SuperVac unit.   Show Less

This Black VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.

To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Black QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.   Show Less

This white Hayden 90° Short Tee is designed for mounting two standard inlet valves exactly opposite each other in the same 2 x 4 wall. SuperValves can not be mounted this way due to their electrical boxes. All three female openings mate with the standard "Schedule L" thin wall PVC pipe and inlet mounting plates.   Show Less

Kit containing one Ivory Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory Standard Inlet #1700-3, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.   Show Less