Miele

The Miele Powerbrush with cord model SEB 213-3 is equipped with long, soft bristles for your more delicate carpets. It is designed to clean low to medium nap carpets. The cog type belt provides positive power transfer from its motor to the brush roll. A special two-way swivel in the wand connector makes this powerbrush very easy to steer and maneuver for greater ease of use.   See also the Owner's Manual by Miele, Inc.

The SEB 213-2 can be used as a direct replacement for the earlier SEB 191, SEB 213 and SEB 213-2 powerbrushes. When replacing your SEB 213 powerbrush, consider purchasing an SEB 236 or SEB 228 powerbrush from Ristenbatt Vacuum for more efficient and easier cleaning.   Show Less

This Miele Turbo Comfort STB 205-3 Turbobrush is equipped with long, soft bristles for your more delicate carpets. It is designed to clean low to medium nap carpets. The cog type belt provides positive power transfer from its turbine to the brush roll. This Turbobrush has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 series canister vacuums.

The Miele STB 205-3 was discontinued in February 2019 and replaced with the newer, more aggressive Miele STB 305-3 Turbobrush.   Show Less

This unique AirTeQ combination nozzle has streamlined airflow for uninterrupted floor contact, superior cleaning results and minimum energy use. It performs well on all smooth flooring and low-pile carpeting. It has top mounted levers to easily switch between carpets and bare floors.

For bare floors brush strips around the perimeter pop out to provide a non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.   Show Less

This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip along the front and squeege along the back pop out to provide soft, non-scratching cleaning action. Notches along the front of the brush allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip and squeege are retracted, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. A soft, non-scratching roller under the elbow bears any downward pressure, enabling the nozzle to glide gently over the floor.   Show Less