This Miele TurboTeQ STB 305-2 Turbobrush is equipped with a brush roll having short, stiff brushes that are significantly more aggressive than in the Miele STB 205-3 Turbobrush for cleaning all carpets heights. The cog type belt provides positive power transfer from its turbine to the brush roll. This Turbobrush will fit and work well on all Miele canister vacuums. It has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 series canister vacuums. Purchase this Turbobrush for more effective and easier cleaning of carpets.
This SFS 10 Extension Hose stretches to enable you to reach 5 feet further with your Miele non-electric hose. It is used by removing your hose's curved handle, attaching the SFS 10 to your hose and then attaching the removed curved handle to the end of the extension hose. When not being used the silver hose collapses into the semi-rigid dark gray jacket and snaps closed. A short section of the silver stretch hose is visible in the photo since it is not completely closed. This extension hose is also known by part #07252210. The SFS 10 Extension Hose mates with Miele non-electric hoses which have two tabs near the curved hose handle which can be easily depressed with your thumb and finger to removal the handle. This extension hose mates perfectly with the Miele vacuum shown above.
The brushing action by the turbine driven revolving brush roll provides deeper cleaning of your upholstered furniture and carpeted stairs. This hand attachment is a great addition for the Miele canister above. It also works well for cleaning cars, trucks and recreational vehicles.
This set of four attachments is especially designed for convenience and performance in cleaning your cars, vans and sports utility vehicles. Included is the Miele Flexible Compact Hand Turbobrush #STB 20, Suction Hose Extension #SFS 10, a 14" Flexible Crevice Tool #SFD 20 Short and Universal Dusting Brush #SUB 20.
This 20" Miele Stainless Steel Wand will look and work well for years to come even in high humitity areas. The large latch release pad near its top makes it easy to remove from the hose or wand while the square hole near its bottom permits additional wands or floor nozzles to latch firmly in place. This wand works well for extending your reach of a Miele U1 or S7 upright vacuum when attached to your existing wand. This wand is slightly over 20" long, making it great as an extension wand for the Miele vacuum shown above to reach higher areas.
Easily extend the reach of your Miele attachments by 18" for those extra high ceilings, fans, etc. More than one wand can be used to extend your reach even farther. This lightweight 19" wand is constructed of high impact ABS Plastics, making it very light weight and durable. It is not made by Miele but is designed to friction fit perfectly onto the Miele hoses and wands as well as their smaller attachments. Add this light weight plastic wand when purchasing the Miele vacuum shown above and receive free shipping on it as well.
This steel 5 3/4" long attachment adapter fits on European 35mm size hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
This plastic 4" long attachment adapter fits on European 35mm size hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
Save with this special Miele Performance Pack. It contains 16 Genuine Miele Type GN AirClean FilterBags, 4 Electrostatic Pre-motor Filters and one SF-HA 50 HEPA Filter to keep your Miele performing well with improved air flow. These bags are for use in Miele S5000, S8000, and Complete C3 series canisters and power teams. Include this Performance Pack when ordering the Miele midsize canister shown above and receive free shipping on it as well.
Genuine Miele 3D AirClean Bags & Filters Type GN to keep your Miele performing well with improved air flow. The box contains 4 White AirClean FilterBags™ with Blue Mounting Collar, 1 Electrostatic Pre-motor Filter and 1 Super Air Clean exhaust filter. The bags are for use in Miele S400, S600, S2000, S5000, S8000, Classic C1, Complete C2 and C3 series canisters and power teams. These Miele 3D AirClean bags are an improved version of the former Miele bags #05588941 and #09338530. Include additional dustbags when ordering the Miele midsize canister shown above and receive free shipping on them as well.
This Genuine Miele HEPA AirClean Exhaust Filter #SF-HA50 has been proven to retain 99.99+% of dust particles. By meeting the very stringent "HEPA 13" specification, it is ideal for allergy and asthma sufferers. It only needs to be replaced approximately once a year. A special "Timestrip" provides a visual indication of when the filter should be replaced. This filter is a direct replacement for the Miele SF-AH 50 HEPA exhaust filter. This SF-HA50 filter is also known as #09616280. The Miele C3 Series vacuum shown above includes this HEPA AirClean Filter.
This special SF-AA 50 exhaust filter combines a thick layer of Activated Charcoal and two electrostatic filters to provide heavy duty trapping of unpleasant odors. This is recommended of pet owners who desire better odor control. The filtration systems in Miele vacuums, when equipped with this exhaust filter, will provide outstanding filtration plus excellant odor control. It only needs to be replaced approximately once a year. A special "Timestrip" provides a visual indication of when the filter should be replaced. This filter is also known as #9616110.