This Deluxe Floor Brush is 12" wide and 2.5" deep, having natural hair brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides between the brush strips carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle. This very deluxe floor brush will friction fit your Hoover WindTunnel telescopic wand perfectly even though it is not made by Hoover. It cleans a wider path than the 9" wide floor brush which comes with the vacuum shown above.
Extend the reach of your Hoover attachments for those extra high ceilings, etc. This 16.5" long genuine Hoover wand is constructed of high impact ABS Plastics, making it very light weight and durable. While the Hoover power team shown above is packaged with a steel telescopic wand, you can purchase this plastic wand for an even longer reach.
This square dusting brush has long, soft nylon bristles around its perimeter. This black 2 7/8" wide attachment is constructed of high impact ABS Plastics, making it very light weight and durable. The Hoover vacuum shown above comes with a combination upholstery tool/dusting brush. Purchase this dusting brush if you want one with longer soft bristles.
This 7 1/2" long Black Crevice Tool is standard on many earlier Hoover uprights. This genuine Hoover attachment is constructed of high impact ABS Plastics, making it very light weight and durable. The crevice tool that is packaged with the Hoover vacuum shown above is only 5 1/4" long. Purchase this crevice tool for a longer reach.
This 13.5" long "2 in 1" Grey Crevice Tool is standard on some Hoover uprights. This genuine Hoover attachment is constructed of high impact ABS Plastics, making it very light weight and durable. This crevice tool fits on all Hoover uprights which have 1 1/4" wands where the attachments fit over the hoses or wands. It also fits inside all Hoover WindTunnel hoses. The crevice tool that is packaged with the Hoover vacuum shown above is only 5 1/4" long. Purchase this crevice tool for a much longer reach.
This 8-Pc. Mini Attachment Set is great for reaching into very small areas of electronic equipment, car interiors, computers, etc. The small 30" long 1/2" hose is equipped with an adapter which attaches to your existing hose. Two 3/8" mini wands mate with a very small crevice tool and two sizes of dusting brushes. This attachment set will fit on your Hoover WindTunnel canister hose perfectly even though it is not made by Hoover.
This genuine Hoover Bagless Canister Primary Filter fits inside the dirt container on all Hoover Bagless canisters. It consists of a cylinder shaped cartridge with fanfold filter media between the beige ends. This long life filter can be washed by holding it under running water. The fanfold design provides a large filter media area for reduced resistance to air flow.
This genuine Hoover Bagless Canister HEPA Exhaust Filter fits inside the retainer on the side of the Hoover Bagless WindTunnel Canisters. It consists of fanfold filter media in a round black plastic cartridge. This filter provides a high level of filtration which meets the stringent HEPA specification for the air that passes through it.
Genuine Hoover Belt to keep the Power Nozzle on your WindTunnel Canister performing well. This flat stretch type belt should be changed at least once per year to keep your vacuum cleaning well. Purchase these belts with the vacuum shown above and receive free shipping on them as well.
