Hoover Vacuum Accessories

Extend the reach of your Hoover canister attachments for those extra high ceilings, etc. This 20" long genuine Hoover wand is constructed of high impact ABS Plastics, making it very light weight and durable.   Show Less

This floor brush to fit Hoover canisters is 9" wide and 2" deep, having a nylon brush strip through the center of the nozzle and at the ends. This is the standard floor brush packaged with most Hoover canister vacuums that use paper bags.   Show Less

This generic 35mm Floor Brush will fit the Hoover Duros and Maytag canisters in their S3590 series. It is 11.75" wide and 2.5" deep, having natural hair brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides between the brush strips carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle.

The wands and floor nozzles on the Hoover canisters this floor brush fits typically fit over the wand and have release buttons on them since they lock on. This nozzle simply friction fits over the wand without a locking device.

For the same nozzle to fit Hoover uprights and bagless canisters with the 1 1/4" USA size, see the Deluxe 12" Floor Brush (1 1/4"). If your attachments have pins and fit inside the wand, see the Hoover 9" Floor Brush with Pin.   Show Less

This square dusting brush has long, soft nylon bristles around its perimeter. This black 2 5/8" wide attachment is constructed of high impact ABS Plastics, making it very light weight and durable.   Show Less