Brands for Central Vac Inlets, Elbows, etc.

This Ivory VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.

To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Ivory QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.   Show Less

Kit containing one White Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White Standard Inlet #1700-1, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.   Show Less

Kit containing one White Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White SuperValve w/Mounting Plate #1750-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.   Show Less